Script

Supplier Quality Management Course @ Udemy

 For those who seek or want to advance their #career in #supplier #quality #management, Would like to share this  course on seven essentials on supplier quality management  in Udemy .   I have put in more than 20 years of knowledge and experience into creating this course. I am an authority in this area where I have wrote books on this subject.

This course will help to prepare for interview which you will outshine your competitor supplier quality manager or engineer post.

You will have life access to this course where you can take your time to finish the course. This is an investment you must make to get ahead in your career as supplier quality management professional. 

Click on the image below or scan the QR code to find out more details

#career #interview #supplier #quality #management 






 

Which quality cost should be the primary focus of your company? Part 1



A few weeks ago I had run a poll in linkedin group 360 Proactive Quality Engineering  to find out which quality cost get the least attention from quality engineering practitioner.   (please refer to embedded link on quality cost to learn more on quality cost)  79% had  selected prevention cost follow by appraisal and internal cost  which reflects the actual situation in the industry.  

Most companies had failed to look into #prevention cost due to quality problem is seldom a pain point during the development stage as the biggest challenge to launch a new product would be time to market.  The development and marketing team would prefer less interaction with other groups to shorten the design cycle, and less work involves to plan in quality in this silo over the wall approach where I design it and you build it.  Sad to say this is still practice in some company till today.   Typically, the quality problem will only show up during mass production or worst during customer integration.  Every organization who are serious about their profitability should understand the cost of correcting a problem at the customer end is more than thousands times more than rectifying problem during design stage.  The table below an example of how quality cost grows in the different product life cycle.  Therefore, preventive cost should be the primary focus, especially product with the short product life as product development happens almost every quarter.  These types of companies should adopt advance quality planning approach to plan quality into every stage of product life.  All quality #engineers should show this table to your management if quality planning is not yet the primary focus of the company.  This is also the best proactive approach to adopt.  

 

Product Life

 Cost of correcting problem

Design phase

$ 35

Before buying the parts

$177

Before start of mass production

$368

During Mass production

$5900

After shipped to customers

$590000 (many parts could have shipped)

 

In my next article,  I shall share on which cost should be a primary focus where in situation that prevention cost cannot be the primary focus anymore.


Channel Evelyn7E premiere – appreciate the support to subscribe



New YouTube channel Evelyn7E premiere today on 7 Dec 2020 especially created for process, quality & management professional.   I will share 30 years of my engineering and management experience on hacking into key areas to achieve good results proactively  in  this channel.  There will be video on application quality and management tools and some insights on what to control in specific manufacturing process such as PCBA,  mechanical assembly to get stable product.  Scan the QR code or click on the video below to go to my channel and subscribe to my channel.  Appreciate the  sharing with all who can benefit from this channel.   


#quality
 #management #sharepost #engineering


Thank You





Sharing is caring

Continuous Improvement Program CIP - 6sigma Methodology